Table of Contents
Advertisement
Main n ce & Care
To maintain maximum cleaning performance, the
following maintenance steps should be performed:
1. Empty the dirt container when the dirt
reaches the "Full" line.
2. Clean the filters regularly to maintain best
cleaning performance.
NOTE: More frequent filter cleaning may be
necessary if you are vacuuming new carpet, fine
dust or have allergy concerns.
Follow the instructions below to perform these
simple maintenance steps.
Empty dirt container
The filtration assembly needs to be emptied
when the dirt reaches the 'Full' line on the side
of the tank.
1. Make sure the vacuum is unplugged from
electrical outlet.
2. Detach the hand vacuum from the rest of
the vacuum.
3. Hold the dirt tank over a garbage container.
Locate the lid release button on the front of
the dirt tank. Press the button and the bottom
lid will open.
4. Close the dirt bin lid and press up until
you hear a click sound that indicates it is
closed securely.
Filtration guide
The separation system can
Assembled View
be washed in water. Refer to
the pictured guide to assist in
removal, assembly, and cleaning.
Cleaning the separator
1. Unplug the vacuum from electrical outlet.
2. Lift the latch on the hand vacuum top cover.
3. Grasp the filtration assembly and pull up to
remove from the hand vacuum dirt cup.
4. Grasp the pleated filter and turn to unlock
from the mesh filter.
5. Clean the pleated filter and mesh filter as
needed.
NOTE: Washing the filters in water will maintain
the best performance.
Filters must be thoroughly dried before use.
WARNING
To reduce the risk of electric shock, turn
power switch o and disconnect polarized
plug from electrical outlet before performing
maintenance or troubleshooting checks.
Filtration Assembly
WARNING
Do not operate cleaner without fi lter in place.
Disassembled View
Removable
Mesh Filter
Pleated Filter
2.
4.
www.BISSELL.ca
7
Advertisement
Table of Contents
