Before Using For The First Time; Cleaning For The First Time; Heating Up The Drawer For The First Time - Miele HR1956 Operating Instructions Manual

Before using for the first time

Cleaning for the first time

 Remove any protective foil.
 Remove the anti-slip mat from the
drawer and clean it with a solution of
hot water and a little washing-up
liquid applied with a clean sponge or
clean, damp microfibre cloth.
 Dry the anti-slip mat with a soft cloth.
 Wipe the drawer inside and out with a
damp cloth to remove any dust or
left-over packaging.
 Dry all surfaces with a soft cloth.
 Replace the anti-slip mat in the
drawer.
16
Heating up the drawer for the
first time
Heat the empty drawer for at least two
hours.
 Switch the drawer on by touching the
On/Off  sensor.
 Touch the  sensor repeatedly until
the  symbol lights up.
 Touch the  sensor repeatedly until
the segment on the far right-hand
side of the temperature display lights
up.
 Touch the  sensor repeatedly until
2h lights up.
 Close the drawer.
The drawer will switch itself off
automatically after two hours.
The drawer is fitted with a contact
switch. This ensures that the heating
element and fan in the appliance only
work when the drawer is closed.
The metal components have a
protective coating. This may give off a
slight smell when the drawer is heated
up for the first time. The smell and any
vapours given off will dissipate after a
short time and do not indicate a faulty
connection or appliance.
Ensure that the kitchen is well
ventilated.