Rename Or Disconnect A Paired Device; About Serial And Usb Communications; About Near Field Communication (Nfc) - Ecom CT50 -Ex User Manual

Chapter 6 — Configure the Computer

Rename or Disconnect a Paired Device

About Serial and USB Communications

About Near Field Communication (NFC)

72
You can rename or disconnect a paired Bluetooth device from the
Settings app.
1 Open the Settings app and tap Bluetooth.
2 Tap the Settings icon
• To rename the device, type the new name, and then tap OK.
To disconnect the device, tap FORGET.
•
You can use these accessories to transmit data to and receive data from
another device through serial or USB communications:
vehicle dock
•
HomeBase
•
• Ethernet HomeBase
USB snap-on adapter
•
RS-232 DEX adapter
•
For information on these accessories, contact your local sales
representative.
If you have a problem with your PC recognizing the USB device, you can
download and install the Honeywell-aidc-usb-driver. The driver is part of
the Honeywell_MobilitySDK_Android software .zip file. The SDK is
available from
www.honeywellaidc.com
Computers > Handheld Mobile Computer > Dolphin CT50 >
Software tab.
NFC technology provides the ability for short-range, wireless data
transfer between the CT50 -Ex and NFC tags or other NFC enabled
devices placed in close proximity to the back of the computer. NFC
equipped CT50 -Ex models support the following modes of operation:
NFC tag reader/writer mode: The computer reads and/or writes
•
digital information from or to an NFC tag.
• Peer-to-Peer (P2P) mode: The computer uses Android Beam and/
or Bluetooth technology to transfer screen content (such as a picture,
contact information, Web page url, or file) between NFC enabled
devices.
next to the paired device.
> Products > Mobile