Advertisement
Available languages
Available languages
MST601
1.
Double-sided blades
2.
Shaving head with blades
3.
On/Off switch
4.
Battery-charging indicator
CHARGING THE APPLIANCE
If the appliance's battery charge is low or the battery is totally discharged, it needs charging. Insert the
power supply cord into the appliance and connect the power supply unit to the electrical grid.
The charging indicator of the appliance will then display its charging status. If the appliance is totally
discharged, the indication of its charging status may be delayed. This delay should be no longer than 2
minutes.
The battery-charging indicator will signal the trimmer's connection to a power-supply source.
The indicator will be switched off after the trimmer is disconnected from charging.
USING THE BLUERAZOR
Switch on the razor using the On/Off switch.
Smooth shaving
In order to shave close, achieve the effect of a one-day beard, carefully move the blade
against the grain.
Cutting the beard
Choose the comb cap suitable for the desired cutting length (1, 3 or 5 mm). Put the comb cap on
the blades. Move the comb with its flat surface close to your skin.
Modelling and forming edges
Keep the blade perpendicular to your skin. Use the upper or bottom blade. Move the trimmer blade
pressed slightly against your skin, and make straight cuts.
Clean the shaving head after every use.
The appliance can be used to shave wet or dry. If you use shaving foam or gel, wash the trimmer under
running water regularly to prevent the head from clogging.
CLEANING THE TRIMMER
Make sure that the device is switched off and disconnected from charging.
Clean the cutting blades after every use of the trimmer. For this purpose, use the cleaning brush. The
blades can be washed under running water.
5.
Charging socket
6.
Shaving-head cover
7.
Comb cap (1, 3 & 5mm)
8.
USB power cable
4
Advertisement
