BUCKINGHAM MFG SuperSqueeze 488P Instructions & Warnings

PN 483M – BuckSqueeze Rescue Trainer (Fig. 1a)
PN 488P – SuperSqueeze Rescue Trainer (Fig. 1b)
These devices (Fig. 1a & 1b) are intended for Rescue
Training only. They are not intended for human support.
These devices are only to be used on the Buckingham
Rescue Buck PN 694 (Fig. 2) or similar devices, never on
a human.
Read and understand these instructions, warnings and all
labels attached to and packed with this product. 483
Series BuckSqueeze or 488 Series SuperSqueeze
instructions must be used in conjunction with the
instructions outlined below. If a copy is required, you
may obtain one from the Buckingham website
(www.buckinghammfg.com) or by contacting
Buckingham Customer Service at 1-800-937-2825.

ATTACHMENT:

1. Attach a suitable linemen's body belt to the Rescue Buck.
2. Attach the Rescue Trainer to the body belt D-rings by
means of locking snaphooks.
3. Raise the Rescue Buck to the desired height.
4. Attach the Rescue Trainer to the pole.
5. Properly adjust the Rescue Trainer.

RESCUE:

1. Ensure the area on the ground below the suspended Rescue Buck is
cleared and secured
2. Properly attach a secondary suspension device and or lowering device to
the Rescue Buck. Ensure all slack is removed from the secondary
suspension device.
3. Cut the Orange strap only (PN 483A) on the Rescue Trainer (see Fig. 3) NOTE:
Cut Replacement Strap at centerline between buckle holes as shown in Fig 4. There
must be a minimum of 1" of material from the edge of hole to end of strap.
4. Lower the Rescue Buck to the ground and resume training exercise.
Fig. 3
483M.DOC (Rev.10/9/17)
PN 230207
BUCKINGHAM MFG.
Instructions / Warnings
(Never stand under a suspended object).
PN 483M
BuckSqueeze
Rescue Trainer
Fig. 1a
Fig. 2
Fig. 4
PN 488P
SuperSqueeze
Rescue Trainer
Fig. 1b
PN 694 Rescue Buck
1 OF 3