Related Manuals for Nibe ELK 5
Summary of Contents for Nibe ELK 5
- Page 1 MOS GB 0834-1 INSTALLATION AND MAINTENANCE INSTRUCTIONS ELK 5, ELK 8 ELK 5, ELK 8 031228 1 x 230V...
-
Page 3: Table Of Contents
Safety valve Technical specifications Venting Dimensions Draining Component positions Actions in the event of freeze risk List of components Technical specifications For the Installer Dealing with malfunctions General information for the installer Low room temperature Function ELK 5, ELK 8... - Page 4 ELK is a Swedish-made quality product offering long life and reliable operation. The serial number* (95) must always be stated in all correspondence with NIBE. 069_ _ _ _ _ _ _ _ _ _ _...
-
Page 5: For Home Owners
Non-return valve apartment blocks. Circulation pump NIBE ELK contains overheating protection and contactors to Expansion vessel externally regulate the two power groups. Flow line sensor The electric module is principally an immersion heater in-... -
Page 6: Operation And Maintenance General
If a part of the heating system is thought to be frozen, con- tact the installer. If the heating system must be switched off for a long period of time, the water should be drained and the immersion heater blocked. ELK 5, ELK 8... -
Page 7: For The Installer
General information for the installer Function Electrical installation Area of use for NIBE immersion heater is in combination with ELK must be installed via an isolator switch with a minimum NIBE ground source heat pumps and air/water heat pumps. breaking gap of 3 mm. -
Page 8: Installation Alternative
5 kW within 2 hours from start-up is required. 5. Select "Auto" operating mode in order for the electrical addition to be permitted to start. For further information, see appropriate “Installation and Maintenance Instructions” for SMO 10. ELK 5, ELK 8... - Page 9 SMO 10 part no. 089 638 SMO 10 Contactor, 1, -K1 J2,2 J1,2 J1,1 Contactor 2, -K2 089 259 SMO 10 part no. 089 259 SMO 10 Contactor, 1, -K1 J2,2 J1,2 J1,1 Contactor 2, -K2 ELK 5, ELK 8...
-
Page 10: Miscellaneous
Miscellaneous Electrical circuit diagram Electrical circuit diagram ELK 5 ELK 5, ELK 8... - Page 11 Miscellaneous Electrical circuit diagram ELK 8 ELK 5, ELK 8...
-
Page 12: Technical Specifications Dimensions
Miscellaneous Technical specifications Technical specifications Dimensions Ø6 x4 ELK 5, ELK 8... -
Page 13: Component Positions
Immersion heater (-R1) Overheating protection (-B1) Miniature circuit-breaker Terminal block (-X9) Contactor (-K1) Contactor (-K2) Connection, flow line, G 40 Connection, return line, G 40 Cable grommet Venting Sign, serial number Mounting hole 4 x (Ø 6mm) ELK 5, ELK 8... -
Page 14: Technical Specifications
25 A 40 A Enclosure class IP 44 Max permitted 0.25 MPa (25 bar) pressure in the boiler Material immersion SIS 2333 EN 1.4301 heater Material tube SIS 2333 EN 1.4301 Part No. 069 025 069 026 ELK 5, ELK 8... -
Page 15: Dealing With Malfunctions
The pressure is to low in the expansion vessel. ■ The load monitor or some external control unit may have blocked the power output. NOTE Work behind panels secured by screws may only be carried out by a qualified installation engineer. ELK 5, ELK 8... - Page 16 ELK 5, ELK 8...
- Page 17 ELK 5, ELK 8...
- Page 18 ELK 5, ELK 8...
- Page 20 NIBE CZ, V Zavetri 1478/6, CZ-170 00 Prague 7 Tel: +420 266 791 796 Fax: +420 266 791 796 E-mail: centrala@nibe.cz www.nibe.cz NIBE Systemtechnik GmbH, Am Reiherpfahl 3, 29223 Celle Tel: 05141/7546-0 Fax: 05141/7546-99 E-mail: info@nibe.de www.nibe.de Vølund Varmeteknik, Filial af NIBE AB, Brogårdsvej 7, 6920 Videbæk Tel: 97 17 20 33 Fax: 97 17 29 33 E-mail: info@volundvt.dk www.volundvt.dk...
Need help?
Do you have a question about the ELK 5 and is the answer not in the manual?
Questions and answers