Radio - Kenwood DPX794BH Instruction Manual

HD Radio™ Tuner
(for
[TUNER SETTING]
[SEEK MODE] Selects the searching method for S / T buttons when pressed.
[AUTO1]: Automatically search for a station or channel. ;
[AUTO2]: Search for a preset station or channel. ;
[MANUAL]: Manually search for a station or channel.
[IF BAND] [AUTO]: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ;
[WIDE]: Subjects to interference noises from adjacent FM stations, but
sound quality will not be degraded and the stereo effect will remain.
[AUTO MEMORY] [YES]: Automatically starts memorizing 6 stations with good reception. ;
[NO]: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 6)
[RECEIVE MODE] Sets the receive mode of the HD Radio receiver.
[AUTO]: Automatically tunes to analog broadcast when there is no
digital broadcast. ; [DIGITAL]: Tunes in to digital broadcast only. ;
[ANALOG]: Tunes in to analog broadcast only.
• The setting automatically returns to [AUTO] when you tune in to another
broadcast.
[CLOCK]
[TIME SYNC]
[ON]: Synchronizes the unit's time to the Radio Broadcast Data System
station time. ; [OFF]: Cancels.
)
Default: [XX]

Radio

(for /
• "ST" indicator lights up when receiving an FM stereo broadcast with
sufficient signal strength.
• The unit switches to FM alarm automatically when receiving an alarm
signal from FM broadcast.
Search for a station
Press B SRC repeatedly to select RADIO.
1
2 Press BAND repeatedly (or press #FM+/
to select FM1/FM2/FM3/AM.
3 Press S / T (or press S / T (+) on the remote control) to
search for a station.
You can store up to 18 stations for FM and 6 stations for AM.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on the remote control).
/ / /
AM– on the remote control)
*
ENGLISH
)
9