Troubleshooting - Beko CH 140020 D User Manual

7

Troubleshooting

Please review this list before calling
the service. It will save your time and
money. This list includes frequent
complaints that are not arising from
defective workmanship or material
usage. Some of the features described
here may not exist in your product.
The refrigerator does not operate.
• The plug is not inserted into the
socket correctly. >>>Insert the
plug into the socket securely.
• The fuse of the socket which
your refrigerator is connected to
or the main fuse have blown out.
>>>Check the fuse.
Condensation on the side wall of the
fridge compartment (MULTIZONE,
COOL CONTROL and FLEXI ZONE).
• Door has been opened frequently.
>>>Do not open and close the
door of refrigerator frequently.
• Ambient is very humid. >>>Do not
install your refrigerator into highly
humid places.
• Food containing liquid is stored in
open containers. >>>Do not store
food with liquid content in open
containers.
• Door of the refrigerator is left
ajar. >>>Close the door of the
refrigerator.
• Thermostat is set to a very cold
level. >>>Set the thermostat to a
suitable level.
• Compressor is not running
• Protective thermic of the
compressor will blow out during
sudden power failures or plug-
out plug-ins as the refrigerant
pressure in the cooling system
of the refrigerator has not been
balanced yet. The refrigerator will
start running approximately after
6 minutes. Please call the service if
the refrigerator does not startup at
the end of this period.
• The fridge is in defrost cycle.
>>>This is normal for a full-
automatically defrosting
refrigerator. Defrosting cycle occurs
periodically.
• The refrigerator is not plugged into
the socket. >>>Make sure that the
plug is fit into the socket.
• Temperature settings are not made
correctly. >>>Select the suitable
temperature value.
• There is a power outage.
>>>Refrigerator returns to
normal operation when the power
restores.
The operation noise increases when
the refrigerator is running.
• The operating performance of
the refrigerator may change due
to the changes in the ambient
temperature. It is normal and not a
fault.
23
EN