CASSETTE RECORDER
RECORDING FROM THE RADIO
1. Set the source selector to FM or MW.
2. Tune to the desired radio station using the TUNING knob.
3. Press 9 / to open the cassette holder.
4. Insert a blank tape.
5. Press 0 to start recording.
6. For brief interruptions, press ;. To resume recording,
press ; again.
7. To stop recording, press 9 /.
SYNCHRO START CD RECORDING
1. Set the source selector to CD.
2. Insert a CD and if desired, programme track numbers.
3. Press 9 / to open the cassette holder.
4. Insert a blank cassette.
5. Press 0 to start recording.
™ Playing of the CD programme starts automatically from the
beginning of the programme.
6. For brief interruptions, press ;. To resume recording,
press ; again.
7. To stop recording press 9 /
To select and record a particular passage within a track
1. Press and hold ∞ or § on the set to select a passage.
2. Put the CD player in ; position at the selected passage.
™ Recording will start from this exact point when you press 0.
3. Press 2; to start recording.
TAPE DECK MAINTENANCE
To ensure a good recording and playback of the tape deck, clean
parts A,B and C show in the diagram below, after approx. 50 hours of
operation, or on average once a month. Use a cotton bud slightly
moistened with alcohol or a special head cleaning fluid to clean the deck.
• Open the cassette holder by pressing 9 /.
• Press 1 and clean the rubber pressure rollers C.
• Press ; and clean the magnetic heads A and also the capstans B.
• After cleaning, press 9 /.
Cleaning of the heads can also be done by playing a cleaning cassette through once.
16
C
B
A
A