Philips AZ1217/61 User Manual page 12

Notes : - To ensure good system performance, wait until the disc completely reads before
proceeding.
- For MP3-CD, the disc reading time may exceed
songs compiled into one disc.
PLAYING A NORMAL DISC
1. Press 2; to start playback.
™ The track number of the current track and 2 appear on the
display.
• To interrupt playback, press 2;.
™ 2 will disappear and the current track number will start flashing.
• To resume playback, press 2; again.
2. To stop playback, press 9.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
• Press ∞ or § on the set repeatedly (or use digits 0 - 9 buttons on the remote control) until the
desired track appears on the display.
• If playback is stopped, press 2; to start playback.
To search for a particular passage during playback
1. Press and hold ∞ or § on the set.
™ During searching, the volume will be muted.
2. When you recognize the passage you want, release the ∞ or § button.
™ Normal playback resumes.
For MP3-CD only
To select a desired album
• On the remote control, press ALBUM+ or ALBUM- until the desired album number appears on
the display.
™ "AXX" will be displayed.
To select a desired track
• Press ∞ or § on the set repeatedly (¡ or ™ on the remote control) to select a desired track from
the current album.
™ "XXX" will be displayed.
• Use the digital keys on the remote control to select the track under current album directly.
To select and playback another track during playback mode
1. Press ∞ or § repeatedly to select another track.
™ The new selected track will show on the display screen and play back continuously.
12
CD/MP3-CD
1 minute due to the large number of
MP3
VCD
L R