Rear Panel - Boss KATANA-50 Mk II Owner's Manual

Panel Descriptions

Rear Panel

KATANA-50 Mk II
13
13
AC IN jack
Connect the included power cord.
* Use only the power cord that was included with the unit.
14
SPEAKER OUT jack
Connect a speaker box. Only use speaker cable to connect the
speaker. Do not use any shielded cable designed for use with
guitars.
When connecting an external speaker to the KATANA-HEAD Mk II
5 If a plug is inserted in this jack, no sound will be output
from the KATANA Mk II's own speaker.
5 You must use a speaker box that has an input
impedance of 8Ω or higher.
When connecting an external speaker to the KATANA-Artist Mk II
5 When the unit is shipped from the factory, the internal speaker
is connected to the 8Ω jack. If a plug is connected to the 8Ω jack,
sound is not output from the 16Ω (A/B) jacks. If you want to use
an external speaker, disconnect the internal speaker's plug from
the 8Ω jack.
5 If you use the 8Ω jack, you must use a speaker box whose input
impedance is 8Ω or higher.
5 If you use the 16Ω (A/B) jacks, you must use speaker boxes whose
input impedance is 16Ω or higher.
6
18
20 21 22 23
HEAD, Artist only
KATANA-100 Mk II, KATANA-100/212 Mk II, KATANA-HEAD Mk II
14 15
19 20 21
* The illustration shows the KATANA-HEAD Mk II. KATANA-100 Mk II and KATANA-100/212 Mk II
do not have MIDI jack and SPEAKER OUT jacks.
KATANA-Artist Mk II
14
19 20 21
15
EFX LOOP SEND/RETURN jacks
100, 100/212, HEAD, Artist only
Connect an external effect device (mono).
Connect the SEND jack to the input of your external effect device,
and connect the output of your external effect device to the
RETURN jack.
16
[STEREO EXPAND] switch
Two KATANA Mk II units can be connected for stereo output.
Stereo connection method
AMP 1
(MASTER)
1.
From the LINE OUT jack of the amp to which your guitar is
connected (MASTER), connect to the POWER AMP IN jack
of the other amp (SLAVE).
2.
Turn "ON" the [STEREO EXPAND] switch of both amps.
* The controls of the slave amp other than the [MASTER] knob and
the [POWER CONTROL] switch do not function.
16 17 18
22 23
15 24 17 18
22 23
100, 100/212, HEAD only
AMP 2
(SLAVE)