Cochlear Wireless Phone Clip Quick Manual page 4

Quick guide for Baha® sound processor users
Cochlear™ Wireless Phone Clip
Pair with your mobile phone
A
Switch on your Phone Clip and remove the silver cap.
B
Make sure your mobile phone's Bluetooth
switched on. Refer to your mobile phone user guide or
visit www.jabra.com for instructions.
Switch on
Remove cap
D
On your mobile phone search for new Bluetooth
and select "Hearing Aid Phone" from the list.
E
If your mobile phone asks for a passcode,
enter "0000" (four zeros).
F
Your Phone Clip is now paired with your mobile phone.
If your mobile phone asks which Bluetooth
to enable, select "Headset".
Cochlear Wireless Accessories are compatible with select Cochlear sound processors. See www.cochlear.com for full compatibility details.
Not all products are available in all markets. Product availability is subject to regulatory approval in respective markets.
Support
For full details about the Cochlear Wireless Phone Clip, please
refer to the User Manual.
For full details about the Cochlear Baha sound processor, please
refer to the User Manual part A.
Cochlear Bone Anchored Solutions AB Konstruktionsvägen 14, 435 33 Mölnlycke, Sweden
Tel: +46 31 792 44 00 Fax: +46 31 792 46 95
www.cochlear.com
Cochlear, 科利耳, コクレア, 코클리어, Hear now. And always, Nucleus, Kanso, Baha, the elliptical logo, and marks bearing an ® or ™ symbol, are either trademarks or registered trademarks of Cochlear Limited
or Cochlear Bone Anchored Solutions AB (unless otherwise noted). The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Cochlear Limited is
under license © Cochlear Bone Anchored Solutions AB 2019. All rights reserved. MAR19.
630670-2
C
function is
®
devices
®
service you wish
®
Visit www.cochlear.com to learn about our
full range of apps and wireless accessories.
Press the blue Bluetooth pairing button on the Phone Clip
®
once to activate the pairing mode for 2 minutes. During
pairing the LED will turn blue.
LED