Cochlear Wireless Phone Clip Quick Manual page 3

Quick guide for Baha® sound processor users
Cochlear™ Wireless Phone Clip
Pair with sound processor
A
Switch off your Baha sound processor.
B
Switch on your Phone Clip and remove
the silver cap.
C Press the white pairing button on the Phone Clip
once using the tip of a pen or similar object.
E While pairing mode is active, switch on your
sound processor.
Switch on
Remove cap
D The LED will flash yellow every two seconds and the
Phone Clip will now be in pairing mode for 20 seconds.
F Successful pairing will be indicated by an
audible melody played in the sound processor.