Cochlear Baha Remote Control 2 Quick Manual page 3

Quick guide for Baha® sound processor users
Cochlear™ Baha® Remote Control 2
Pairing with your Baha Sound Processor
Make sure the Remote Control 2 is fully charged and is turned ON.
A
1. Switch off your Baha sound processor.
2. Press the pairing button on the Remote Control
once using the tip of a pen or similar object.
B
1. The 'search' icon will display on the screen and the
Remote Control will now be in pairing mode for 20 seconds.
2. While pairing mode is active, switch on your sound processor.
C
1. Successful pairing will be indicated by an audible
melody played in the sound processor.
2. Searching and connecting to the sound processors.
Note! If you have two sound processors, repeat step A to C.
Cochlear Wireless Accessories are compatible with select Cochlear sound processors. See www.cochlear.com for full compatibility details.
Not all products are available in all markets. Product availability is subject to regulatory approval in respective markets.
Support
For full details about the Cochlear Baha Remote Control 2,
please refer to the User Manual.
For full details about the Cochlear Baha sound processor,
please refer to the User Manual part A.
Cochlear Bone Anchored Solutions AB Konstruktionsvägen 14, 435 33 Mölnlycke, Sweden
Tel: +46 31 792 44 00 Fax: +46 31 792 46 95
www.cochlear.com
Cochlear, 科利耳, コクレア, 코클리어, Hear now. And always, Nucleus, Kanso, Baha, the elliptical logo, and marks bearing an ® or ™ symbol, are either trademarks or registered
trademarks of Cochlear Limited or Cochlear Bone Anchored Solutions AB (unless otherwise noted). © Cochlear Bone Anchored Solutions AB 2019. All rights reserved. MAR19.
630671-3
Searching for both
sound processors.
Searching for right
sound processor.
Everyday
Connected to left
sound processor.
Visit www.cochlear.com to learn about our
full range of apps and wireless accessories.