Draytek VigorAP 912C Quick Start Manual page 18

WiFi Password
nd
Enable 2 WiFi
2 nd WiFi Name
2 nd Wifi Password
Enable Bandwidth
Limit
Enable Station
Control
Then click Next Step.
(e) Now change the management password for the VigorAP and click Next
Step. This secures the VigorAP from unwanted configuration changes.
The VigorAP has a default security key printed
on a label on its base.
You should change the password here – choose
a 'strong' password (complex with a mix of
letters, symbols and numbers).
If you want to provide two networks (SSIDs)
which clients can connect to then you can
enable a 2 nd network name.
The wireless network name which is visible to
users. This name will appear in addition to the
primary WiFi Name.
You should change the password here – choose
a 'strong' password (complex with a mix of
letters, symbols and numbers).
Configure bandwidth limits users connected to
the VigorAP's wireless network.
Configure time limits for users connecting to
the VigorAP's wireless network.
13