Changeover heating/cooling meter or calculators for cooling meters only with 2 additional inputs/outputs optionally with m-bus, rs 232 and rs 485 (12 pages)
Page 1
Installations- und Bedienungsanleitung Ultraschall-Großwasserzähler Installation and operating instructions Ultrasonic bulk water meter...
Page 2
Deutsch Produktbeschreibung Aktivierung des Messgerätes Ultraschall Großwasserzähler Typ IUW für Kalt- Das Display des Messgerätes befindet sich bei ■ wasser bis 50 °C Auslieferung im „sleep mode“. Die Aktivierung Ultraschall Großwasserzähler Typ IUWN mit des Displays erfolgt zehn Sekunden nachdem das ■...
Page 3
Absperrorgane vor und hinter dem Messgerät Die Konformitätserklärung ist im Lieferumfang ■ schließen und die Einbaustelle druckentlasten. enthalten. Diese, und die neuesten Informationen Vorhandenes Messgerät oder Passstück demon- zum Produkt können auch unter www.zenner.de ■ tieren. abgerufen werden.
Page 4
Deutsch Menüanzeige: Segmenttest / Firmware-Version: Mit einem NFC fähigen Endgerät, können folgende Der Segmenttest wird alle 5 Min. ausgeführt (3 Sek. (nicht editierbaren) Menüanzeigen aufgerufen an / 3 Sek. aus) danach wird die Firmware-Version werden. Dazu das NFC Endgerät in die Nähe der für 3 Sek.
Page 6
Suitable measures must be taken to ensure that ■ any contamination or damage is excluded during transport to the installation location. The IUW series has been approved with a flow ■ sensitivity class U0/D0 (no inlet or outlet section required). However, to achieve the best measure- ment results, we recommend observing national regulations and recognised rules of technology.
Page 7
The declaration of conformity is included in the Prior to installing the measuring instrument, the delivery. The latest information on this product can ■ be called up from www.zenner.com pipe system is to be carefully flushed. Close the valves upstream and downstream of the ■...
English Menu display: Segment test / Firmware version: With an NFC-enabled device, the following (non- The segment test will be carried out every editable) menu displays can be called up. Bring the 5 minutes (3 seconds on / 3 seconds off), after then NFC device close to the NFC interface and remove the firmware version is displayed for 3 seconds.