3.
EN
Once you have assembled the seat, make sure
that the safety seat has been secured properly
again:
1.
2.
3.
4.
5.
Make sure the safety seat has been secured
properly. If it sticks out or moves, repeat
the assembly.
Hip part of the seatbelt must go through red indicators
under elbow rests on the seat (M-1).
Arm part goes above the elbow rest from the belt
fastening side (M-2).
Arm part of the belt goes through the handle under
the headrest (M-3).
Seatbelts are tense and must not be twisted.
Seatbelt fastening is not under the elbow rest (N).