General Operation; Radio Reception - Philips AZ1138/00 User Manual

General Operation

General Operation
1 To select your sound source adjust the
POWER slider to CD, RADIO or
TAPE/ .
OFF
2 Adjust the sound with the VOLUME and
DBB / (Dynamic Bass Boost)
OFF ON
controls.
3 To switch off the set, adjust the POWER
slider to TAPE/
the cassette keys are released.
Note:When the set is switched off the tuner
presets will be retained in the set's memory.
8
position and check
OFF

Radio Reception

1 Adjust the POWER slider to RADIO.
Display: shows
The radio frequency is then shown.
2 Press FM•MW once or more to select the
desired waveband.
Display: shows your waveband
3 Press and hold down TRACK•SEARCH
∞ or § briefly to tune to a radio station.
Release when the frequency in the display
starts to change.
The radio automatically tunes to a radio
station of sufficient reception. Display
shows Srch during automatic tuning.
• To tune to a weak station, press
TRACK•SEARCH ∞ or § briefly and
repeatedly until you have found optimal
reception.
To improve reception
– For FM, pull out the telescopic aerial. Incline
and turn the aerial.
Reduce its length if the signal is too strong
(very close to a transmitter).
– For MW the set is provided with a built-in
aerial so the telescopic aerial is not needed.
Direct the aerial by turning the whole set.
4 To switch off the radio, adjust the POWER
slider to TAPE/
the cassette keys are released.
Radio
tu briefly.
position and check
OFF