Starting The Engine; Using The Self-Propel Drive - Toro TimeMaster 21199 Operator's Manual

Starting the Engine

Standard Model
Pull the recoil handle slowly until you feel resistance, then pull
it sharply. Allow the rope to return to the engine slowly.
Note: If the machine does not start after several attempts,
contact an Authorized Service Dealer.
Electric-Start Model
You can start the engine on an electric-start model by using
either the ignition key or the recoil-start handle.
•
Ignition Key
Turn and hold the ignition key to the S
(Figure 17); when the engine starts, release the ignition
key.
Important: Do not attempt to start the engine with
the blade-control bar engaged; otherwise, you may
blow the fuse.
Note: Do not hold the ignition key in the S
for longer than 5 seconds to prevent burning out the
starter motor.
•
Recoil-Start Handle
1. Turn the ignition key to the R
17).
2. Pull the recoil handle slowly to the rear until you
feel resistance, then pull sharply. Allow the rope to
return to the engine slowly.
position
TART
TART
G017516
Figure 17
position
UN

Using the Self-Propel Drive

To operate the self-propel drive, simply walk with your hands
on the upper handle and your elbows at your sides, and the
machine will automatically keep pace with you
Note: You can self-propel the machine with the blades
engaged or disengaged.
Note: Use the traction-assist handle in situations when you
need more control than you have with the self-propel drive
alone.
position
g017516
(Figure
12
(Figure
Figure 18
18).
g193359