Troubleshooting; Safety Instructions; Malfunction Causes And Remedies - Silvercrest SKRD 30 A1 Operating Instructions Manual

Troubleshooting

Troubleshooting
In this section you receive important information for the localization and remedying
of malfunctions. Observe the instructions in order to avoid danger and damage.

Safety instructions

WARNING
Observe the following safety information to avoid danger and property
damage:
► Repairs to electronic devices may only be carried out by specialists who
have been trained by the manufacturer. Considerable danger to the con-
sumer and damage to the device can occur as a result of incorrect repairs.

Malfunction causes and remedies

The following table will help with localizing and remedying minor malfunctions:
Defect
The display is
3
showing nothing.
No sound
Noisy radio
reception
NOTICE
► If you cannot solve the problem with the aforementioned methods, please
contact Customer Service.
SKRD 30 A1
Possible cause
The plug is not inserted.
Mains power socket is
not supplying power.
The volume is set to
minimum.
The radio is switched off .
The radio station is not
properly tuned in.
Reception is too weak.
Solution
Insert the plug into the
mains power socket.
Check the circuit fuse.
Increase the volume with the
VOLUME knob.
14
Switch the radio on with the
On/Off button.
4
Tune the station correctly with the
buttons Tune+ and Tune–
13
Try to improve reception by moving
the wire antenna .
15
GB
.
12
23