Search For The Next Station; Saving Stations Manually; Access Saved Stations; Automatic Station Search (Ams Function) - Silvercrest SKRD 30 A1 Operating Instructions Manual

Search for the next station

GB

Saving stations manually

Access saved stations

Automatic station search (AMS function)

20
The device can automatically search for the nearest station.
♦ Press and hold down the button Tune+
The device searches for the nearest station with suffi cient reception quality.
♦ Repeat this process until you have found the station you are looking for.
Prerequisite: The device is in the radio operational mode.
The device has 30 memory slots available for station frequencies. To save a station
frequency proceed as follows:
♦ Tune, as described previously, the desired station.
♦ Press the button Lock/Mem.
the lower, right corner of the display
♦ Select with the buttons Preset+
for the tuned station between and
♦ Press the button Lock/Mem.
station is saved on the selected memory slot. The symbol MEM lights up
constantly.
Prerequisite: The device is in the radio operational mode.
♦ Select with the buttons Preset+
for the saved station between and
Prerequisite: The device is in the radio operational mode.
To allocate the memory slots to the station frequencies with the strongest receiv-
able stations a station search can be carried out.
NOTICE
► With the carrying out of the following described function all previously
saved stations will be lost.
♦ Press and hold down the button Bass/AMS/Mode
seconds. The device begins the station search and allocates to the memory
slots - the found stations.
Handling and operation
or Tune-
12
13
once. The symbol MEM begins to blink in
6
.
3
and Preset– the desired memory slot
11 10
.
again. The reception frequency of the tuned
6
and Preset– the desired memory slot
11 10
.
for at least two seconds.
for at least two
7
SKRD 30 A1