CHERUBINI BLUE WAVE RX Instructions Manual page 7

ELECTRIC WIRING TO MOTOR COMMAND FOR UP-DOWN
MODE (2 independent UP-DOWN buttons)
To connect the switch, use only kind of switches with mechanical or electrical interlock, to
prevent to press both buttons at same time.
230 V 50 Hz
4
COMMAND MANAGEMENT FROM WHITE WIRE
MODE: UP-STOP-DOWN-STOP / UP-DOWN
NB: The default function provided in the motors leaving the factory is UP-STOP-DOWN-
STOP for singular UP/DOWN button switch.
It's always possible to change to the UP-DOWN, as described below:
PROCEDURE TO CHANGE THE CONTROL MODE:
T1: Already programmed remote control
B + C
T1
Switch with mechanical
or electrical interlocking
1
2
3
B
T1
7
1 - BROWN
2 - WHITE
3 - BLUE
4 - YELLOW-GREEN
C
Tn (2 sec)
I
GB