Advertisement
Step 2: Open the web browser and it will redirect to
WPG-130N home page automatically, or you can
enter the default IP address 192.168.1.1 to
access it.
Step 3: Download the client utility (WPG) of Windows
7/Vista/XP and execute it. After installing the
program, you'll see WPG shortcut
desktop.
Software Installation – Mac OS X
Step 1: Enable your WiFi and connect to WPG-130N.
Step 2: Open the web browser and enter the default IP
address 192.168.1.1 to access the WPG-130N
home page.
Step 3: Download the client utility (WPG) of Mac OS X
and execute it.
on your PC
– 5 –
– 7 –
Step 4: Launch WPG on the desktop, and then input the
login code. The login code can be found from the
projector screen.
Please make sure the firewall in Windows will
allow the WPG software to pass through.
Note
Step 5: Click the
button to start projection, or choose
one of the numbers 1~4 to project to the split
screen.
Login Code
Control panel for Screen Projection
Step 4: Launch WPG software and enter the login code.
Login Code
Control panel for Screen Projection
Further Information :
The
above
steps
introduce
configurations for WPG-130N. For further configurations of the
utility (WPG), Virtual Extended Screen, and Wi-Fi AP-Client etc,
please refer to the user's manual in the CD. If you have further
questions, please contact the local dealer or distributor where
you purchased this product.
Menu
Status Indicator
– 6 –
Menu
Status Indicator
simple
installations
2011-E60050-001
– 8 –
and
Advertisement
