Advertisement
Quick Links
FSR
TB-CHRG Installation Instructions
244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
1. DETERMINE LOCATION AND CUT 6-1/16 x 5-3/16 HOLE
WITH 3/8 MIN - 5/8 MAX RADIUS CORNERS IN TABLE TOP.
2. INSTALL MOUNTING BRACKETS TO ASSEMBLY AND SECURE
TO TABLE BY SCREWING MOUNTING SCREWS TO UNDERSIDE
OF TABLE.
(2) MOUNTING
43096
TB-CHRG ASSEMBLY
6-1/16
BRACKET
5 MOUNTING BRACKET
POSITIONS TO ACCOMMODATE
VARIOUS TABLE THICKNESSES
MOUNTING BRACKET
AND MOUNTING
SCREW INSTALLED
3/8 MIN - 5/8 MAX R.
PANEL
DIRECTION
CUSTOMER TO PROVIDE
KO SLUG/PENNY/OTHER
HARD FLAT PIECE FOR
SCREW END, WITH SOFT
TABLE WOOD
MOUNTING BRACKET
AND MOUNTING SCREW
(SEE BELOW)
(2) MOUNTING
SCREW
LIT1564
Advertisement
Related Manuals for FSR TB-CHRG
Summary of Contents for FSR TB-CHRG
- Page 1 TB-CHRG Installation Instructions 244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207 3/8 MIN - 5/8 MAX R. 1. DETERMINE LOCATION AND CUT 6-1/16 x 5-3/16 HOLE WITH 3/8 MIN - 5/8 MAX RADIUS CORNERS IN TABLE TOP.
- Page 2 BEFORE TIGHTENING CABLE TIES, DO THE FOLLOWING: 1. Ensure loop for the A/C cord does not touch any edge when in the open position. 2. Test cycle the unit to ensure AC cord make contact with any edges or components inside the box. Shown with lid closed.
Need help?
Do you have a question about the TB-CHRG and is the answer not in the manual?
Questions and answers