Advertisement
Quick Links
FSR
SYM-IN Installation Instructions
244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
1. SELECT LOCATION FOR ASSEMBLY AND CUT APPLICABLE HOLE
IN TABLE. INSERT ASSEMBLY INTO HOLE AND PUSH DOWN ON
FLANGES. TO REMOVE ASSEMBLY FROM TABLE, PRY BOTTOM
OF CAPTURE SPRING OFF ASSEMBLY FRAME.
HOLE CUT OUT
SHARP TO 3/16" MAX
RADIUS CORNERS
TYPE
FLANGE SIZE
A FRAME
6.30"
B FRAME
7.73"
C FRAME
8.69"
D FRAME
10.12"
43346
ASSEMBLY
CUT OUT
SIZE
CUT OUT SIZE
6-1/16"
7-7/16"
8-7/16"
9-7/8"
FLANGE
SIZE
5.00"
TABLE
CAPTURE SPRING
TO REMOVE ASSEMBLY, INSERT
SCREWDRIVER THRU OPENING AND
PRY BOTTOM OF CAPTURE SPRING
OUT OF ASSEMBLY FRAME LIP, BOTH
SIDES. LIFT ASSEMBLY OUT OF HOLE
TO COMPLETE REMOVAL.
LIT1728
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for FSR SYM-IN
Summary of Contents for FSR SYM-IN
- Page 1 SYM-IN Installation Instructions 244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207 1. SELECT LOCATION FOR ASSEMBLY AND CUT APPLICABLE HOLE IN TABLE. INSERT ASSEMBLY INTO HOLE AND PUSH DOWN ON FLANGES. TO REMOVE ASSEMBLY FROM TABLE, PRY BOTTOM OF CAPTURE SPRING OFF ASSEMBLY FRAME.
- Page 2 IF APPLICABLE, INSTALL KEYSTONE CONNECTORS (SOLD SEPARATELY) INTO INSERTS (SINGLE OR DUAL), MAKE WIRING CONNECTIONS AS REQUIRED, AND INSTALL INSERTS INTO ASSEMBLY. IF KEYSTONE CONNECTORS ARE TO BE INSTALLED AT A LATER DATE INSTALL BLANK INSERTS. FRONT FACE MUST BE CLOSED WITH KEYSTONE OR BLANK INSERTS.
Need help?
Do you have a question about the SYM-IN and is the answer not in the manual?
Questions and answers