Operating The System - Philips FW320C/22 User Manual

OPERATING THE SYSTEM

OPTIMAL JAZZ
DSC DBB
TECHNO ROCK
DIGITAL SOUND CONTROL
CD
CD 1 • 2 • 3
STANDBY . ON
DUBBING
DUBBING
• FAST
• NORMAL
NORMA• HIGH RECORD REPLAY
Important:
Before you begin operating the system, complete the
preparation procedures.
Demonstration mode
The system has a demonstration mode that shows the
various features offered by the system. Whenever the
system is switched on from the wall socket, the
demonstration mode will start automatically.
Notes:
– During demonstration mode, if you press any source (or
standby-on) button, the system will switch to the
respective (or standby) mode.
– When the system is switched to standby mode, 5
seconds later, the demonstration mode will resume.
10
STEREO REC DBB
I S
NEWS
HSD
REPLAY FM MW LW AM PM
REPEAT SHUFFLE
PROGRAM TIMER
FW 318C
TUNER TAPE
BAND TAPE 1 • 2
TUNING DEMO
SEARCH
STOP•CLEAR PLAY PAUSE
To cancel demonstration mode
• Press and hold STOP•CLEAR Ç (DEMO) (on the
system only) for 5 seconds to stop the demonstration.
™ The demonstration mode will be switched off.
™ The system will switch to standby mode.
Easy Set
EASY SET allows you to store all available radio stations in
a particular band (FM, MW or LW) automatically.
• Press and hold STANDBY•ON (on the system only) for
5 seconds; when the system is in standby or
demonstration mode.
™ "EASY SET" will be displayed and followed by
"TUNER".
™ EASY SET will start with the last active band.
™ All available radio stations with sufficient signal
strength will be stored or until 40 presets are filled.
RDS NEWS!
CLOCK
MAX
TIMER PROGRAM
AUX
VIDEO
PRESET
MIC LEVEL
PREV NEXT
• MAX
Notes :
– When EASY SET is used, all previously stored stations
will be erased.
– The last preset station will appear on the display when
EASY SET is completed.
Switching the system ON
• Press STANDBY•ON (on the system only) , CD,
TUNER, TAPE or AUX.
You can also switch on the system by pressing any one of
the CD DIRECT PLAY buttons.
n
Switching the system to standby mode
• Press STANDBY•ON again.
™ The system will switch to standby mode.
Selecting the Source
• Press the respective source selection button: CD,
TUNER, TAPE or AUX.
™ The display indicates the selected source.
Note:
– For an external source, make sure that you have
connected the audio left and right OUT terminals of the
external equipment (TV, VCR, Laser Disc or DVD player)
to the AUX IN terminals.