Operating The System; Speakers (Left/Right) - Philips FW798W/22 User Manual

CONTROLS
¤ REAR +/-
– to adjust the sound level of the
surround speakers.
‹ CENTER +/-
– to adjust the sound level of the center
speaker.
› TEST TONE
– to check the sound level of the Front
Left, Front Right, Center and Surround
speakers.
fi MUTE
– to switch off the sound temporarily.
fl SLEEP TIMER
– to switch the system to standby mode
at a selected time.
‡ SHUFFLE
– to play all the available discs and their
tracks in random order.
° B
– to switch the system to standby mode.
Notes for remote control:
– First select the source you wish to
control by pressing one of the
source select keys on the remote
control (e.g. CD, TUNER, TAPE 1/2
or AUX).
– Then select the desired function
(PLAY, NEXT, etc.).
10
Untitled-7 10

OPERATING THE SYSTEM

MINI HIFI SYSTEM
PROGRAM SHUFFLE
REPEAT TIMER REC
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz
1KHz
STANDBY
ON
CLOCK/
C D 1 • 2 • 3 BAND
TIMER
CD TUNER
PROG
SIDE A•B
SEARCH • TUNING STOP • CLEAR PLAY PAUSE
SOUND NAVIGATION
INCREDIBLE
SURROUND
DIGITAL
SOUND CONTROL
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system. When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume 5
seconds later.
6/15/00, 12:50 PM
C
STEREO
BACK
FRONT HSD
L R
4KHz 8KHz
2KHz
PRO LOGIC
DOLBY B
S S
NR
RDS
RDS
NEWS/TA
NEWS!
TAPE 1 • 2 CDR
VOLUME
TAPE AUX
A. REV
PRESET
PREV NEXT
MIC
LEVEL
DYNAMIC BASS
MIC
BOOST
To stop the demonstration mode
• Press and hold STOP•CLEAR Ç (on
the system only) for 5 seconds when
the system is in demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Note:
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold STOP•CLEAR Ç (on
the system only) for 5 seconds when
the system is in standby mode.
™ The demonstration will begin.
3139 116 18884