Dometic DW6 Operating Manual page 13

DW6
Operating with AC power supply (fig. 7, page 5)
➤ Insert the mains adapter into the power supply socket on the back of the refrigerator.
➤ Connect the adapter plug to the socket on the back of the refrigerator.
➤ Connect the mains plug to an AC socket.
Operating with DC power supply (fig. 8, page 5)
➤ Remove the AC mains adapter from the power supply socket on the back of the refrigerator.
➤ Connect the plug of the DC connection cable to the socket on the back of the refrigerator.
➤ Connect the DC connection cable to the DC power supply.
6.4 Using the refrigerator
A
NOTICE!
Food should be stored in its original packaging or in suitable containers.
➤ Press the POWER button for 3 seconds to switch on the refrigerator.
✓ The display (fig. 4 3, page 4) switches on and shows the current cooling temperature.
➤ Press the POWER button again for 3 seconds when you want to switch the refrigerator off.
✓ The display switches off.
➤ Press the LIGHT button for 3 seconds to switch the interior light on or off.
Setting the temperature
I
NOTE
The cooling performance can be affected by:
• The ambient temperature
• The number of bottles to be cooled
• The frequency with which the door is opened.
➤ Press the TEMP – button to reduce the cooling temperature in increments of 1 °C.
➤ Press the TEMP + button to increase the cooling temperature in increments of 1 °C.
✓ The set temperature appears on the display and flashes twice. The current interior temperature
of the refrigerator is then displayed.
Storing bottles (fig. 9, page 6)
➤ Place the bottles horizontally on the grid shelves.
➤ Place a maximum of two bottles on a shelf.
➤ Make sure that the bottles do not exceed the maximum bottle length of 35 cm.
EN
Using the refrigerator
13