Siemens 6ES7547-1JF00-0AB0 Manual page 23

Parameters/address space
4.3 Address space
The following table provides an overview of the maximum address spaces for the respective
interface modules.
IM
IM 155-5 PN BA
IM 155-5 PN ST
IM 155-5 PN HF
IM 155-5 DP ST
Note
IO-Link Master behind an IM 155-5 DP ST
In connection with an IM 155-5 DP ST, you configure the IO-Link master exclusively using a
GSD file. Install the corresponding GSD file. You can find this for download on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/80206700).
Port configuration CPU
With an IO-Link Master CM 8xIO-Link, you can commission the IO-Link ports of the IO-Link
Master or the connected IO-Link devices in two different ways:
● Port configuration with STEP7 or GSD (without S7-PCT)
● Port configuration with S7-PCT
Port configuration with STEP7 or GSD (without S7-PCT)
Requirements
You have selected the "Port configuration without S7-PCT" check box in the configuration of
the IO-Link master in STEP 7.
Procedure
You configure the IO-Link master directly in STEP 7:
● Activate the diagnostics
● Configuration of the I/O data lengths for each port
● Activating the Port Qualifier Information (PQI)
● Port mode:
– Operation in "IO-Link Autostart" mode (default)
– Operation in "IO-Link Manual" mode
– Operated as DI
– Deactivated
22
Firmware version Max. address space
V4.0.2
V4.1.0
V3.0.1
V3.0.0
Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)
Max. address space
per station
64 bytes
512 bytes
512 bytes
244 bytes
Manual, 03/2019, A5E45488510-AA
per module
64 bytes
256 bytes
256 bytes
32 bytes