News/Ta - Philips FW-C785/25 User Manual

Note:
– Some RDS station may be transmitting a real
time clock at a minute interval. The accuracy of
the transmitted time depends on the transmitting
RDS station.
NEWS/TA (traffic announcement)
(only available in RDS radio station)
Once the News PTY (Programme Type) or TA
(Traffic Announcement) data is detected in a
RDS station, it will switch to TUNER mode
automatically.
IMPORTANT!
You can activate NEWS/TA function in
Standby, Demonstration or any source
mode except Tuner and Eco Power Standby
mode.
To start NEWS/TA function
1
Press NEWS/TA to select NEWS or TA
function.
➜ If NEWS is selected, "NEWS" and
appear on the display.
➜ If TA is selected, "TA" and
the display.
➜ It will scan the radio stations stored in the
first 5 preset and wait for the News Programme
Type/Traffic Announcement data to be available
in any of these RDS radio stations.
G If no RDS station is detected in the first 5
presets, the system will exit NEWS/TA function.
➜ "NO RDS NEWS" or "NO RDS TA" will be
displayed and or
NEWS
the display.
2
When NEWS or TA transmission is detected, the
system will switch to Tuner mode automatically.
➜
or will start flashing.
NEWS TA
Notes:
– You have to exit Tuner mode before selecting
NEWS/TA function.
– While searching NEWS/TA in progress, the
current source activity will remain uninterrupted.
– Before you activate the NEWS/TA feature,
ensure that the first 5 presets have RDS stations.
– The NEWS/TA works only once for each
activation.
– The NEWS/TA will not start if a recording is in
progress.
pg 001-029/C785/22-Eng
G Press NEWS/TA again or press TUNER to
G During news bulletin or traffic announcement,
will
NEWS
will appear on
TA
will disappear from
TA
21
Radio Reception
To cancel NEWS/TA function
select tuner mode.
press any other available source keys to execute
the relevant source mode.
12/11/01, 5:36 PM
21
3139 115 21201