Tuning To Preset Radio Stations; Erasing A Preset Radio Station; Rds - Philips FW-C785/25 User Manual

Radio Reception
Notes:
– If you attempt to store more than 40 preset
radio stations, "PROGRAM FULL" will be
displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
Programme mode automatically.

Tuning to Preset Radio Stations

G Once you've preset the radio stations, press í
or ë to select the desired preset number.
➜ The preset number, radio frequency, and
waveband will appear on the display.

Erasing a Preset Radio Station

1
Press í or ë to select the preset radio station
to be erased.
2
Press and hold Çon the system until "PRESET
DELETED" appears on the display.
➜ The radio frequency remain on the display.
➜ The preset numbers of all other preset radio
stations in the band with higher numbers are also
decreased by one.
G Repeat steps 1–2 to erase other preset radio
stations.
For Recording, please refer to "Tape
Operation/Recording".
20
pg 001-029/C785/22-Eng

RDS

RDS (Radio Data System) is a broadcasting
service that allows FM stations to send additional
information along with the regular FM radio
signal. This additional information can contain:
Station name: The radio station name is
displayed.
Programme type: The following programme
types exist and can be received by your tuner:
News, Affairs, Info, Sport, Educate, Drama,
Culture, Science, Varied, Pop M, Rock M, M.O.R.
(middle of the road music), Light M, Classics,
Other M, No type.
Radio text (RT): text messages appear on the
display.
Receiving RDS Radio Station
G Tuned to a radio station from FM band.
➜ If the radio station transmitting RDS signal,
the RDS logo (
will appear on the display.
To check the RDS information
G Press RDS repeatedly to scroll through the
following information (if available) : STATION
NAME ™ PROGRAMME TYPE ™ RADIO TEXT
™ TUNED FREQUENCY ™ STATION NAME ....
Notes:
– If the tuned radio station does not transmit RDS
signal or is a non RDS station, "NO RDS" will be
displayed.
– If the RDS text message is not available at the
RDS station, "NO RDS TEXT" will be displayed.
RDS Time
Some RDS station may be transmitting a real
clock time at an interval of every minute.
Setting the RDS time
1
Press CLOCK•TIMER twice.
➜ "00:00" or current time starts flashing.
2
Press RDS.
➜ "SEARCH RDS TIME" will be displayed.
➜ When RDS time is read, "RDS TIME" will be
displayed. The current time will be displayed for
2 seconds and stored automatically.
➜ If the RDS station does not transmit RDS
time within 90 seconds, "NO RDS TIME" will be
displayed.
20
) and the radio station name
3139 115 21201
12/11/01, 5:36 PM