Table of Contents
Advertisement
First Steps
from cabinet.
10. To replace door reverse the above
order, and securely tighten all
screws to prevent hinge slippage.
Base Screw
Harness
Restraint
Wire
Setting the
Temperature Control
Cool Down Period
For safe food storage, allow 4 hours for
the appliance to cool down completely.
The unit will run continuously for the first
several hours. When using the appliance
as a freezer, foods that are already frozen
may be placed in the freezer after the first
2 or 3 hours of operation. Unfrozen foods
should NOT be loaded into the freezer
until freezer has operated for 4 hours.
When loading freezer, freeze only 3
pounds of fresh food per cubic foot of
freezer space at one time. Distribute
packages to be frozen evenly throughout
the freezer. It is not necessary to turn the
control knob to a colder setting while
freezing food.
Optional Features
Temperature Control
Electromechanical Temperature Control
Hinge
(some models)
Screws
• Converting Between Refrigerator
Door
Connector
Cabinet
Connector
STEP 1: Locate the temperature control
STEP 2: Turn the knob to the area
STEP 3: Adjust the knob to customize your
refrigerator to allow time for the tempera-
7
NOTE
Your appliance may have some or all
of the features listed below. Become
familiar with these features and their
use and care.
and Freezer:
The convertible model can operate as
either a freezer or a refrigerator. The
electromechanical temperature control
provides this adjustment and is located
inside the appliance. The temperature
is factory preset to provide satisfactory
food storage temperatures. However,
the temperature control is adjustable
to provide a range of temperatures for
your personal satisfaction.
All Freezer or All Refrigerator
Change Modes to Fit Your Needs
knob at the bottom of the
interior back wall.
marked "freezer" or
"refrigerator" to select your
desired mode.
temperature setting or select * for
our recommended setting.
TIP: Change modes a few hours before
you need to load up your freezer or
ture to stabilize between adjustments.
Powering Off: To shut off cooling to the
unit, turn the temperature control knob
counterclockwise all the way to the
OFF position.
Advertisement
Table of Contents
