Midland BIZTALK BR200 Programming Instructions Manual page 3

b. It is recommended you right click on the installation program to create a shortcut or simply drag
and drop the folder to your desktop to create the shortcut to the programming software.
3. The program is an "auto – run" installation and will automatically open/run upon double clicking
the icon or the software program for installation.
PROGRAM A BR200 RADIO
1. Turn the BR200 radio off.
2. Connect the BR200 radio to your computer using the BA1 programming cable.
a. Open the rubber accessory cover on the
side of the radio and plug the programming
cable into the radio.
b. Connect the USB plug of the programming
cable to a USB port on your computer.
Connect to a USB port
on your computer
3. Turn the radio on.
a. The red transmit LED will briefly turn on, then off, to confirm the connection.
4. Double click on the shortcut to open the BR200 Programming software.
||
3
Note:
Version number shown
for illustrative purpose
only, be sure to use the
latest version from the
Midland website."
Connect to accessory
jack on the radio
(Be sure to press the connector in
firmly to insure a good connection).
midlandusa.com