Specifications; Chassis Physical Design - Dell S6010-ON Installation Manual

This chapter lists the S6010–ON specifications.
CAUTION: Operate the product at an ambient temperature not higher than 113°F (45°C).
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same
or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.
NOTE: For RoHS information, see
Topics:
•

Chassis Physical Design

• IEEE standards
• Agency Compliance
Chassis Physical Design
Table 3. Chassis physical design
Parameter
Height
Width
Depth
Weight
Table 4. Environmental parameters
Parameter
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Maximum Thermal Output
Table 5. AC power requirements
Parameter
Power Supply
Maximum Current Draw Per System
Restricted Material Compliance.

Specifications

Specifications
1.71 inches (43.5 mm)
17.09 inches (434 mm)
18.11 inches (460 mm)
21.7 lbs (9.86 kg)
Specifications
32° to 113°F (0° to 45°C)
5% to 90% (RH), noncondensing
–40° to 158°F (–40° to 70°C)
5% to 95% (RH), noncondensing
1153.265BTU/hr
Specifications
100–240Vac 50/60Hz
4.11A @411W/100Vac
9
Specifications 39