Siemens RDS120 User Manual page 16

Operating the thermostat from the thermostat main unit
4
WLAN connection
16 | 38
To connect to a network
1. If the thermostat is selected for commercial application (common wireless
infrastructure), do the following:
– From the Home screen, tap
page displays.
– If required, enter the administrator password.
– Tap , and then tap
nearby.
2. If the thermostat is selected for residential application (individual wireless
infrastructure), do the following:
– From the Home screen, tap
displays.
– Tap , and then tap
nearby.
3. Tap the desired network. If necessary, tap
networks to select one.
4. For secured networks, enter the selected password, then tap "Connect".
Note: For more information about the administrator password, see Creating an
administrator password [➙ 18].
To add a network manually
1. If the thermostat is selected for commercial application:
– On the "Advanced Settings" page, tap , tap
down to find and tap "Add Network".
2. If the thermostat is selected for residential application:
– On the "Settings" page, tap
and tap "Add Network".
3. Enter the Network name (SSID) information.
4. To select a security type, tap the "Security" field.
5. Tap "Connect".
6. If prompted, enter the relevant password, and then tap "Connect".
To configure current network settings
1. If the thermostat is selected for commercial application:
– On the "Advanced Settings" page, tap
network displays on the screen.
2. If the thermostat is selected for residential application:
– On the "Settings" page, tap
displays on the screen.
3. Tap "Network Settings". The default DHCP (Dynamic host configuration
protocol) setting page displays on the screen.
, and then tap . The "Advanced Settings"
. Wait for the thermostat to discover the networks
, and then tap until the "Settings" page
. Wait for the thermostat to discover the networks
or
, tap , and then tap
and then tap
and then tap . The current network
to scroll through the
, and then tap to scroll
to scroll down to find
. The current
A6V10733807_enUS_a