Table Of Contents - Sentex SPECTRUM Series Programming Instructions Manual

The Spectrum systems are very reliable and easy to use. However, if programmed incorrectly the systems
may not work properly. Before attempting to program and use these systems, you should become familiar
with them by reading the instructions in this manual. You can also use the space provided in the manual to fill
in the entries before you program them into your system. If you have any questions concerning these
instructions, please contact your installing dealer.
This document is divided into seven sections and one appendix as follows:
1. Overview of System Operation
2. Entering and Exiting the Programming Mode
3. Basic Hints and Programming Rules
4. Setting System Characteristics
5. Entering and Erasing Telephone Numbers and Entry Codes
6. Remote Programming
IMPORTANT: The Sentex Systems warranty on this system is conditioned upon Sentex Systems being paid in full for this
equipment. This warranty will not be honored until such payment has been received by Sentex Systems.
COPYRIGHT  2001
ALL RIGHTS RESERVED
THIS DOCUMENT IS PROTECTED BY COPYRIGHT, AND MAY NOT BE COPIED OR ADAPTED WITHOUT THE
PRIOR WRITTEN CONSENT OF SENTEX. THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO
SENTEX AND SUCH INFORMATION MAY NOT BE DISTRIBUTED WITHOUT THE PRIOR WRITTEN CONSENT OF
SENTEX. THE FIRMWARE INCLUDED IN THE SPECTRUM SYSTEMS AS THEY RELATE TO THIS
DOCUMENTATION ARE ALSO PROTECTED BY COPYRIGHT AND CONTAIN INFORMATION PROPRIETARY TO
SENTEX.
Visit us at www.sentexsystems.com
Rev A
IMPORTANT NOTICE

TABLE OF CONTENTS

SECTION NAME
Appendix 1
Doc 6001573
PAGE
2
3
4
5
10
13
14
Page 1 of 15