Night Mode; Test Tone; Changing The Password - Philips MCD129/98 User Manual

DVD Menu Operations

Night Mode

NIGHT MODE

TEST TONE

NIGHT MODE SET TO OFF
OFF
Select this when you want to enjoy the surround
sound with its full dynamic range.
ON
Select this to level out the volume. High volume
output will be softened and low volume output
will be brought upward to an audio level. This
feature is only available for movies with Dolby
Digital mode.
Test Tone
NIGHT MODE
TEST TONE
TEST TONE SET TO ON
ON
After selecting this item, the system will start
testing the speaker from left, right, surround
cyclically until you exit tone test.
- You can adjust speakers level when you are
testing the speaker.
- The availability of the various channels test
depend on the number of speakers connected.
Notes:
– You can press à to exit test tone mode at any
time.
26
OFF
ON
1
2
3
OFF
ON
4
●
5

Changing the password

You can change the four-digit code used as
Password.
SUBTITLE REPEAT
SYSTEM MENU
1 5
2 3
OK
AUDIO
1 2
4
4 5
7 8
PROG 0 ANGLE
In disc mode, press SYSTEM MENU.
Select icon and press 4.
➜
Playback will pause.
Press à / á/4/3 on the remote control to
navigate in the menu.
➜
, and press á.
Move to
➜
Move to "PASSWORD" and press á.
OSD LANG
PLEASE ENTER OLD PASSWORD
Use the numeric keys (0-9) to enter your
four-digit code.
➜
The password supplied by default is 1234.
➜ If you forget the four-digit code, press 9 four
times, the system will change back to the default
password.
Go to "Password" and enter your new code.
Then enter the same code again to confirm.
OSD LANG
PLEASE ENTER NEW PASSWORD
Press SYSTEM MENU again to remove the
menu.
A-B SHUFFLE
DISC MENU
MUTE
+
VOL
3
GOTO
6
ZOOM
9 DSC
DBB
ENTER CODE
ENTER CODE