Programming Favourite Tracks; Display Information; Playing In Slow Motion - Philips MCD129/98 User Manual

Programming favourite tracks

For VCDs/CDs
You can select and program up to 99 desired
tracks for playback in the desired sequence. If
you like, store any track/chapter/title more than
once.
1
During playback, press 9 twice to fully stop the
playback.
2
Press PROG on the remote control (or
PRGOGRAM on the system) to activate
programming mode.
➜
On the TV screen, "PROGRAM" and
"P 00:00" are displayed.
➜
On the system's display, "PRG" flashes, and
P00: 00 is displayed.
3
Use the Numeric Keypad (0-9) on the
remote control to enter your desired track
number.
4
Press OK on the remote to store the track.
➜ P00 is changed to P01 , indicating the first
programmed track is stored and the next
program sequence is available.
5
Repeat steps 3-4 to store other tracks.
➜
If you attempt to program more than 99
tracks, FULL is displayed, and no track can be
stored.
6
PressÉÅ to playback the program.
➜
"PRG" is displayed during playback.
To Erase program
You can erase program by doing one of the
following:
● During program playback, press 9 two times.
●
Select AUX source.
●
Open the disc door.
➜
"PRG" disappears from the display.
Helpful hints:
– Programming is not available for DVD and
MP3 disc.
Disc Operations

Display information

During playback, press DISPLAY on the
remote control repeatedly to display various disc
playback time on the TV screen ( and the
system's display).
For DVDs:
TITLE ELAPSED - elapsed playback time of
current title
TITLE REMAIN - remaining time of current
title
CHAPTER ELAPSED - elapsed playback
time of current chapter
CHAPTER REMAIN - remaining time of
current chapter
OFF - turns off the display information
For VCDs/CDs
SINGLE ELAPSED - elapsed playback time
of current track
SINGLE REMAIN - remaining time of current
track
TOTAL ELAPSED - elapsed playback time of
disc.
TOTAL REMAIN - remaining playback time of
disc
OFF - turns off the display information

Playing in slow motion

For DVDs/VCDs:
1
Press SLOW repeatedly on the remote control
during playback to select the desired speed
number in slow forward (SF) and backward (SR)
playback.
➜
Sound will be muted.
2
To return to normal speed, pressÉ Å ,or press
SLOW repeatedly until " PLAY" is displayed.
21