Table of Contents
Advertisement
System Menu Options
➜
Auto: Allows automatic selection of the Pro
Logic II mode depending on the discs being
played back.
Panorama
Extends the front stereo image to include the
surround speakers for a wraparound effect.
➜
On: Enables this function.
➜
Off: Disables this function.
Dimension
Incrementally adjusts the sound field either
towards the front or towards the rear speakers.
The adjustable range is from -3 (towards the
rear) to +3 (towards the front).
Center Width
Adjusts the center image from all front speakers
to varying degrees. A larger value adjusts the
center image towards the front left and right
speakers. The adjustable range is from 0 (center
channel sound is output only from center
speaker) to 7 (center channel sound is output
only from front left and right speakers).
Reverb Mode
Reverb mode provides a virtual surround sound
experience using just two speakers.
➜
Off, Concert, Living Room, Hall,
Bathroom, Cave, Arena and Church.
HDCD
The option included in HDCD (High Definition
Compatible Digital) is: "Filter".
Filter
Sets the audio output cutoff frequency point
when playing an HDCD disc.
➜
Off, 44.1K and 88.2K.
Night mode
In this mode, the high volume outputs are
softened and low volume outputs are brought
upward to an audible level. It is useful for
watching your favourite action movie without
disturbing others at night.
30
➜
On: Select this to level out the volume. This
feature is only available for movies with Dolby
Digital mode.
➜
Off: Select this when you want to enjoy the
surround sound with its full dynamic range.
Video Setup Page
The options included in Video Setup page are:
"Component", "TV Mode" and "Quality".
Component
Sets the video output according to your video
connection. This setting is not required if you are
using the VIDEO OUTPUT jack (yellow) to
connect the DVD micro system to your TV.
➜
Ypbpr: Select this if you have connected the
DVD micro system to your TV using Component
video jacks.
➜
S-Video: Select this if you have connected
TV Mode
Selects interlace or P-SCAN video output mode
when Ypbpr is selected.
➜
P-SCAN and Interlace.
In the progressive scan mode, you can enjoy the
high quality picture with less flickers. It only
works when you have connected the DVD
player's Y Pb Pr jacks to your TV that supports
the progressive video input. Otherwise, a
distorted picture will appear on the TV. For
proper progressive scan set up, see page 43-44.
Quality
This menu helps you to set the video quality.
1
Press 3 4 to highlight "Quality".
2
Press 2 or OK to enter Video Quality Setup.
The options included in Video Quality Setup
page are: "Sharpness", "Brightness", "Contrast",
"Gamma", "Hue", "Saturation" and "Luma Delay".
Advertisement
Table of Contents
