Table of Contents
Advertisement
Clock/Timer
M I C R O S Y S T E M
iR
Setting the clock
1
In Standby mode, press PROG/CLOCK
button.
➜
The clock digits for the hours flash.
2
Press ¡1 / 2™ to set the hours.
3
Press PROG/CLOCK again.
➜
The clock digits for the minutes flash.
4
Press ¡1 / 2™ to set the minutes.
5
Press PROG/CLOCK to confirm the time.
Note:
– If the clock has not been set, -- --:-- -- will be
displayed.
Setting the timer
●
The system can be used as an alarm clock. CD
or TUNER can be set to switch on at a preset
time. The clock time needs to be set first
before the timer can be used.
●
If no button is pressed within 90 seconds during
timer setup, the system will exit timer setting
mode automatically.
1
In any mode, press TIMER on the remote
control for more than 2 seconds.
2
Press ¡1 / 2™ (or CD / TUNER on the
remote control) to select sound source.
3
Press TIMER to confirm your desired source.
➜
The clock digits for the hours flash.
M C
M
1 0 8
AUX - IN
4
Press ¡1 / 2™ to set the hours.
5
Press TIMER again.
➜
The clock digits for the minutes flash.
6
Press ¡1 / 2™ to set the minutes.
7
Press TIMER to confirm the time.
➜
The timer is now set and actiated.
Note:
- If source CD is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
To activate and deactivate timer
●
In standby or during playback, press
TIMER once.
➜
Display shows
disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch
off by itself after a set period of time. The clock
time needs to be set first before the sleep timer
can be used.
●
Press SLEEP on the remote
control repeatly to select
desired time before system
shuts off.
➜
Display shows
options for selection:
●
To deactivate, press SLEEP on the remote
control once or more until "
press STANDBY ON y on the system or
remote control.
if activated, and
SLEEP
and series of time
SLEEP
,
,
,
, ,
" is shown, or
TIMER
...
10
Advertisement
Table of Contents
