Setting the clock
IMPORTANT!
– To set clock in the Eco Power mode, press and hold STANDBY-ON/ECO
POWER 2
2
2 on the set for 3 seconds or more to switch to normal standby
2
2
mode first before proceeding with the procedures below.
1
In standby mode, press and hold
2
When the hour digits flash, turn the
set the hours.
3
Press
RDS/CLOCK SET
control on the front panel to set the minutes.
VOLUME
4
Press
RDS/CLOCK SET
C
Enjoy
Playing a disc
1
Press
OPEN/CLOSEç
button again to close the disc tray.
➜
Make sure the label side of the disc is facing up.
2
Press
ÉÅ
to start playback.
3
To stop playback, press 9.
RDS/CLOCK SET
control on the front panel to
VOLUME
again and the minute digits flash. Then turn the
again to confirm the time setting.
to open the disc tray and load in a disc, then press the same
on the system.