Table of Contents
Advertisement
Chapter 3 Basic Operations — Operating with the remote control
How to display the on-screen menu (main menu) when the projector is used
1)
Press the DIGITAL LINK button on the remote control.
f The [INPUT SELECT] menu of this device is displayed.
2)
Press the MENU button or the RETURN button on the remote control.
f On-screen menu (main menu) is displayed.
How to display the on-screen menu (main menu) when the flat panel display is used
It is necessary to assign the input switch to the number button with the function setting of the flat panel display
main unit when the remote control of the flat panel display is used for the operation.
1)
Press the number button of the remote control where the DIGITAL LINK is assigned.
f The [INPUT SELECT] menu of this device is displayed.
2)
Press the RETURN button on the remote control.
f On-screen menu (main menu) is displayed.
Note
f The on-screen menu (main menu) of this device can be displayed by the menu operation of the display (projector or flat panel display)
connected to the <DIGITAL LINK OUT 1> terminal/<DIGITAL LINK OUT 2> terminal of this device. The operation will differ depending on the
model of the display, so refer to the Operating Instruction of the display in use. When displays are connected to both <DIGITAL LINK OUT
1> terminal and the <DIGITAL LINK OUT 2> terminal, displaying of the on-screen menu (main menu) of this device is possible only with the
menu operation of the display connected to the <DIGITAL LINK OUT 1> terminal.
For the operation procedure, refer to the Operating Instructions of the display in use.
f Depending on the model of the display (projector or flat panel display) in use, the MENU button or the RETURN button may not be present
on the remote control.
f For detailed operating method of the on-screen menu (main menu) of this device, refer to "Menu navigation" (x page 38).
36 - ENGLISH
Advertisement
Table of Contents
