Cd/Mp3-Cd Operations; Discs For Playback; Playing A Disc; Text Display - Philips MCM395/12 User Manual

IMPORTANT!
The lens of the CD player should never be
touched.
X

Discs for playback

This system is able to play :
– All pre-recorded audio CDs
– All finalised audio CDR and audio
CDRW discs
– MP3-CDs (CD-ROMs with MP3 tracks)
●
CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.

Playing a disc

1
Select CD source.
2
Press OPEN/CLOSE 0 on the front panel to
open the CD compartment.
➜
"OPEN" is displayed.
3
Insert a disc with the printed side facing up and
press OPEN/CLOSE 0 to close the CD door.
➜
"READING" is displayed as the CD player
scans the contents of a disc, and then the total
number of tracks and playing time (or the total
number of albums and tracks for MP3 disc) are
shown.
4
Press É Å to start playback.

CD/MP3-CD Operations

To interrupt playback
●
Press É Å .
●
To resume playback, press É Å again.
To stop playback
●
Press Ç.
Notes:
– Disc play will also stop when you select another
source or the disc has reached the end.
– For MP3 disc, the disc reading time may exceed
10 seconds due to the large number of songs
compiled into one disc.

Text display

During CD playback
●
Press DISPLAY repeatedly to see the following
information.
➜
Track number and elapsed playback time of
current track.
➜
Track number and remaining playback time of
current track.
➜
Track number and total elapsed playback
time.
➜
Track number and total remaining playback
time.
During MP3-CD playback
●
Press DISPLAY repeatedly to select three
display modes : Track, Album and ID3.
Track ➜ The current track name scrolls.
Album ➜ The current album name scrolls.
ID-3 ➜ The ID-3 tag scrolls (if any).

Selecting a different track

● Press TUNING S / T repeatedly until
the desired track number appears in the display.
●
If playback is stopped, pressÉ Å to start
playback.
15