Finding A Passage Within A Track; Selecting A Desired Album/Track (Mp3 Disc Only); Different Play Modes: Shuffle And Repeat; Programming The Disc Tracks - Philips MCM395/12 User Manual

CD/MP3-CD Operations

Finding a passage within a track

1
Press and hold down on TUNING S / T.
➜
The disc is played at high speed.
2
When you recognize the passage you want,
release TUNING S / T.
➜
Normal playback continues.
Selecting a desired album/track
(MP3 disc only)
To select a desired album
● Press ALBUM/PRESET 4 / 3 repeatedly.
To select a desired track
● Press TUNING S / T repeatedly.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.
1
Press REPEAT and SHUFFLE on the remote
control to select :
➜
SHUF – tracks of the entire disc/
programme are played in random order.
➜
SHUF REP ALL – to repeat the entire
disc/ programme continuously in random order.
➜
REP ALL – to repeat the entire disc/
programme.
➜
REP – to repeat the current track.
2
To return to normal playback, press REPEAT
and SHUFFLE until the various SHUFFLE/
REPEAT modes are no longer displayed.
● You can also press 9 to cancel your play mode.
Note:
– If Shuffle is activated on a MP3-CD, all titles
stored in the disc will be played in random order.
16

Programming the disc tracks

Programming tracks is possible when playback is
stopped. Up to 20 tracks can be stored in the
memory in any order.
1
Press PROG on the remote control to enter
the programming mode.
2
Press TUNING S / T repeatedly to
select your desired track number.
● For MP3 disc, press ALBUM/PRESET 4 / 3
and TUNING S / T to select the
desired album and track for programming.
3
Press PROG to confirm the track number to be
stored.
4
Repeat steps 2-3 to select and store all desired
tracks.
5
To start playback of your disc programme, press
Ç followed byÉÅ.
●
If you attempt to programme more than
20 tracks, "FULL" will appear on the
display. In this case :
➜
The system will exit programming mode
automatically.
➜
Pressing Ç button will erase all the
programmed tracks.
➜
Pressing ÉÅ button will start playback the
programmed tracks.

Reviewing the programme

In stop mode, press and hold PROG until the
display shows all your stored track numbers in
sequence.

Erasing the programme

●
Press Ç once when playback is stopped or
twice during playback.
➜
PROG disappears and "CLEAR" is displayed.