Table of Contents
Advertisement
Power Rating
CAUTION
Accessories Supplied
Attenuator Options
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
General Information
Do not exceed the RF power rating of 0. 5W average, or 2450W peak with a
maximum pulse width of 200 s. Do not connect an attenuator RF input or
output connector to greater than 5 Vdc. If the attenuator must be connected
to a device with a potential greater than 5 Vdc, use a blocking capacitor .
The 355E and 355F programmable attenuators are supplied with a 7-pin,
male connector (1251-1037) for the solenoid drive input.
Figure 3 on page 7
shows solenoid and connector wiring diagrams available
under Option 007 for 355E and 355F.
6 VHF Attenuators Operating and Service Manual
Advertisement
Table of Contents
