Subscribe to Our Youtube Channel
Related Manuals for Euromex bScope Fluo
Summary of Contents for Euromex bScope Fluo
- Page 1 SUPPLEMENTARY INSTRUCTION MANUAL FOR bScope Fluo MICROSCOPES EUROMEX Microscopen B.V. HOLLAND www.euromex.com...
- Page 2 1. Installation of the fluorescence illuminator and microscope head Most parts are already mounted on the microscope. Only two parts are packed separately. The microscope head (fig. 1 number 1) and the fluorescence illuminator (fig. 1 number 2). Fig. 1 1.1 Installation steps 2.
- Page 3 2. Operation of reflected illumination system (LED fluorescence unit) To get the best result when observing with fluorescence please pay attention to the following: 1. Select the fluorescence filter that matches the fluorochrome and fluorescent characteristic. 2. No autofluorescence specimen or device should be in the optical system, such as the cedar immersion liquid wich has cyan autofluorescence.
- Page 4 2.2 Operation of the field diaphragm The field diaphragm has been pre-centered and is ready to use, but due to possible vibration or inclination during transport it may deviate, therefore always double check. If it is not pre-centered, then please follow the following steps: 1.
Need help?
Do you have a question about the bScope Fluo and is the answer not in the manual?
Questions and answers