Connecting To Your Pc; Connecting An Additional Appliance; Using Ac Power - Philips WACS5 User Manual

Installation
DIGITAL OUT:
1
Insert the plug of digital audio cables (not
supplied) to the DIGITAL OUT socket
2
Connect the other end of the audio cables to the
DIGITAL IN terminal of the additional
appliance.
OPTICAL OUT:
1
Insert the plug of optical audio cables (not
supplied) to the OPTICAL OUT socket
2
Connect the other end of the audio cables to
the OPTICAL IN terminal of the additional
appliance.
OPTICAL OUT
DIGITAL OUT
B

Connecting to your PC

●
Connect the supplied Ethernet cable to
Center's ETHERNET and your computer's
Ethernet port. For details, see the manual
Connect to your PC.
OPTICAL OUT
DIGITAL OUT
WACS5_Eng/37
C
1
2
OPTICAL OUT
DIGITAL OUT
Center
Center
1
2
Center
22

Connecting an additional appliance

It is possible to use an additional appliance, e.g.
TV, VCR, Laser Disc player, DVD player or CD
C5
recorder, with the WA Center .
Insert the red plug of the red/white audio cables
(not supplied) to the red socket AUX IN R and
the white plug to the white socket AUX IN L.
Connect the other end of the audio cables to
the AUDIO OUT terminals of the additional
appliance.
OPTICAL OUT
DIGITAL OUT
Helpful hints:
– If the connected device has only a single audio
out terminal, connect it to the AUX IN left terminal.
Alternatively, you can use a "single to double" cinch
cable, but the output sound still remain mono.
– Always refer to the owner's manual of other
equipment for complete connection.

Using AC power

Make sure all the connections have been made
before switching on the power supply.
Connect the AC power cord to the wall socket.
This switches on the power supply.
When Center or Station is switched to standby,
it is still consuming some power. To disconnect
the system from the power supply
completely, remove the power plug from
the wall socket.
The type plate is located on the rear of the
set.
8/3/2005, 15:12
Center