Table of Contents
Advertisement
Tuning to radio stations
1
Press SOURCE or TUNER once or more to
select the desired waveband : FM or AM (MW).
2
Press and hold ALBUM/TUNING
the frequency indication starts to change, then
release.
The display will show "SEARCH" until a radio
If the FM station is received in stereo,
shown..
3
Repeat step 2
sired radio station.
To tune to a weak station, press ALBUM/
5 6
TUNING
optimal reception found.
Note:
antenna and a built-in AM antenna. For optimal
FM reception, fully extend and adjust the position
of the FM antenna until the strongest signal is
found.
Programming radio stations
You can store up to 40 radio stations (FM:20,
AM: 20) in the memory.
Automatic programming
1
In tuner mode, press and hold PROGRAM for
2 seconds to activate the automatic program
mode.
[AUTO] (auto) is displayed and begins to
blink.
nal strength will be stored automatically.
To stop automatic programming
Press STOP 9 .
Note:
– If no preset number is selected, automatic preset
5 6
will begin from preset (1) and all your former
until
presets will be overridden.
Manual programming
=
1
Tune to a radio station (refer to "Tuning to radio
is
stations").
2
-
Press PROGRAM.
PROG
To store the radio station to another
preset number
Press PRESET +/- í / ë to to select the de-
sired preset number.
3
Press PROGRAM again to store the radio sta-
tion.
PROG
4
Repeat steps 1–3 to store other radio stations.
To exit manual programming
Press STOP 9 .
Tuning to preset radio stations
Press PRESET +/- í / ë until the desired pre-
set station is displayed.
Radio Reception
begins to blink.
disappears.
-
15
Advertisement
Table of Contents
