Table of Contents
Advertisement
External Sources
Connecting external equipment
1
Connect the audio out terminal of the portable
device (i.e. iPod or MP3 player) to the MP3
LINK terminal of your system.
2
Press SOURCE once or more to select MP3
LINK.
in
"MP3
" is displayed.
Clock/Timer
Setting the clock
1
In standby mode, press and hold DISPLAY/
CLOCK.
Press PRESET +/- í / ë ( í / ë on the
2
remote) to set the hours.
3
Press DISPLAY/CLOCK.
Press PRESET +/- í / ë ( í / ë on the re-
4
mote) to set the minutes.
5
Press DISPLAY/CLOCK
Note:
– If the last selected source is MP3-LINK/AUX,
you cannot use the remote control to set the
clock in standby mode.
16
Note:
– All the sound control features (DSC or DBB, for
example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
Setting the sleep timer
The sleep timer enables the system to switch off
by itself after a set period of time.
1
In active mode, press SLEEP on the remote
control repeatedly until the desired timer option
appears.
Selections are as follows (time in minutes):
SLPOFF=SLP120=SLP90=SLP60
=SLP45=SLP30=SLP15=SLPOFF
Display shows
if activated, and disappears if
deactivated.
2
To cancel the sleep function, either press
SLEEP on the remote control once or more
until "SLPOFF" appears, or press STANDBY-
ON ( y on the remote) to switch to standby
mode.
Advertisement
Table of Contents
