Dmx Control; Display Panel - Magicfx SWIRLFAN II User And Installation Manual

1.4

DMX CONTROL

The MAGICFX SWIRLFAN II is controlled with 1 safety adress and 1 operational
®
address.
DMX Address
Safety address
Start address (Effect density)
The safety address cannot be the same as the operational address. Operating of
these addresses results in the following:
DMX Address
Safety address
Start address
(Effect density)
When you link multiple machines with DMX, we advise you to use the same Safety
address for all machines.
CAUTION
1.5

DISPLAY PANEL

DMX/RDM SETTINGS
CONFIGURATION
The display panel is located on the backside of the MAGICFX
following menu structure for all options in the menu. Use the buttons for navigation
and selection. The left-hand LED blinks red when DMX is active. The right-hand LED
continuously lights red when an error is present.
DMX Value (decimal)
0 99
100 154
155 255
0 9
10 255
Always plug in a DMX Terminator into the DMX output of the final
unit in the control sequence. Using a DMX Terminator improves
signal reliability.
MAGICFX® SWIRLFAN II — User and Installation Manual
Address range
1 – 255
1 – 255
DMX addresses
Result
Device disabled
Device enabled
Device disabled
No output
Variable confetti output
Operation of the DMX addresses
INFORMATION
ERROR HISTORY
Display panel
SWIRLFAN II. Check the
®
7